Rolls Battery Technical Support
How can we help you today?
Maintenance
For the first 12 months of usage, the following tests should be completed: MONTHLY • Measure and record resting/loaded voltage • Check electrolyte...
Sat, 6 Jun, 2020 at 4:55 PM
Acid spills can be neutralized using simple baking soda and water. (see manual for preventative maintenance).
Note: ensure that baking soda does not ent...
Thu, 9 Oct, 2014 at 11:43 PM
Causes of battery sulfation:
Batteries sit too long between charges. As little as 24 hours in hot weather and several days in cooler weather.
Batte...
Mon, 11 Dec, 2017 at 12:24 PM
Batteries should be kept clean at all times. If installed or stored in a dirty location, regular cleaning should be performed. Before doing so, assure that ...
Sat, 6 Jun, 2020 at 5:02 PM
Cleaning Rolls Standard 1/4-turn bayonet, R-Caps & Watermiser Battery Caps CLEANING VENT CAPS You might notice a sticky dark gray residue on the...
Sat, 6 Jun, 2020 at 5:02 PM
The frequency of corrective equalizations will vary by system due to factors such as operating temperature, frequency of cycling and depth of discharge. ...
Tue, 19 Oct, 2021 at 9:00 AM
In new batteries, electrolyte should be clear of debris or any discolouration.
During normal use you may notice the electrolyte in the battery cel...
Tue, 14 Oct, 2014 at 8:19 PM
What is the required liquid level inside the battery? ELECTROLYTE - ADDING DISTILLED WATER Only distilled (preferred), deionized or reverse osmosis ...
Mon, 25 May, 2020 at 3:10 PM
Ideal operating temperature for Flooded deep cycle lead-acid batteries is 25°C (77°F). Battery capacity and cycle life is affected by operating te...
Tue, 10 Aug, 2021 at 10:58 AM
Load testing may be performed to determine the current capacity of a battery or battery bank. This is often done when capacity has shown a noticeable decre...
Wed, 3 Jun, 2020 at 7:14 PM